12 Dec 09 Make a Pool Heater – A Simple Plan to Build a Solar Pool Heater!
Are you interested in warmer pool water and expansion of your season? Did you know that you can build your own pool heating, and get better results than the ones you buy in a store? There are ways to make a pool heater and get the water much warmer than you're used to. Here is a simple plan that I will win in almost 12 degree water in Indiana.
First, you want to go to your local hardware store and get 100 feetblack tube. This should be at least half an inch in diameter. They also want about 10 to 15 feet of PVC pipes, which can closely fit to get to the end of the black hose. You should be able to turn the black hose and it should not really thick. You also need a 2 to 8 foot 2 by 4s, a shutoff valve that closes you fit on the PVC tube and a pump.
Next, you want to take the 2 by 4s and holes in it big enough to fit the black hose between them. Then you will cutthem in half long ways so that you keep a cup on the black hose. Now you have the black hose back and forth in tight loops without kinks run between the 2 by 4s. You want to round up 4 sections 2 of 4, 4 meters each.
Finally, you have to be mounted in this part of the can, on a roof or somewhere in direct sunlight. We got it mounted on a short roof, which goes through a fenced area for our dogs was, but it could be a shed or a house, too.Then you are in PVC pipes come together, and the shutoff valve to the end that the water and the pump and a portion of the PVC and closed at the other end. Make sure to mount the pump in a dry and flat surface.
